Multi Pressure Vehicle Mounting Fire Pumps

We are Manufacturer, Exporter, Supplier of Multi Pressure Vehicle Mounting Fire Pumps, Vehicle Mounted Normal Pressure Fire Pumps and our setup is situated at Kolhapur, Maharashtra, India

Key Features

• CE marked & UL classified Pumps.
• Normal Pressure Performance of 4000 lit/min at 10 bar pressure.
• High Pressure performance up to 400 lit/min at 40 bar pressure.
• Available in Aluminium / Gun Metal/ Stainless Steel material of construction.
• Step up gear box attachment to pump option also available with variety of gear ratios.
• Fitted with fully automatic Pressure Relief Valve & Thermal Relief Valve for safety of equipment as well as operator.
• Total Compliance with EN 1028 & NFPA 1901.
  • Primer




    All 'Endura' series fire pumps are fitted with advanced 'E-Primatic' priming system
    Highly reliable twin piston horizontal reciprocating priming system which is automatic but at the same time gives the pump operator a choice to engage it only when needed.
    An in built electro-magnetic clutch gives drive to piston primer & actuation of primer is controlled by a pressure switch, not directly by water pressure.
    Primers can be operated in Auto Mode OR Manual Mode
     

    • Auto Mode - Whenever pump pressure is below 0.8 bar primer is engaged automatically & when pump pressure is above 0.8 bar primer is dis-engaged automatically.
     

    • Manual Mode - Engage the primer manually but once pump registers 0.8 bar pressure, primer is dis-engaged automatically. Once disengaged, Primer will not engage automatically even if pump pressure is below 0.8 bar. So pump can be operated at very low pressures without primers being engaged. This mode particularly developed for de-watering application where pump runs at very low pressure for pro-longed time.
       
    Easy to operate.
    Entire Priming system is made of stainless steel which makes it highly reliable.
    Variety of completely illuminated pump control panels are available.
    Capable of priming the pump from 9 meters at NTP conditions.
    Complies all EN 1028 requirements.
       




    All series of vehicle fire pumps can be supplied with Primatic priming system.
    Completely automatic, highly reliable twin piston reciprocating priming system.
    An eccentric cam gives drive to piston & disengagement of primers is directly controlled by water pressure. Primer disengages automatically when pump registers 2 bar pressure.
    Complete priming system is made of stainless steel.
    Capable of priming the pump from 9 meters at NTP conditions.
    Complies all EN 1028 requirements.





    All series of vehicle fire pumps can be supplied with Water Ring Priming system.
    Completely automatic in operation.
    Available in three material options - Aluminium, Gunmetal (Bronze)
    Capable of priming the pump from 7 meters.
       

  • Specification Sheet
      TECHNICAL DATA SHEET FOR MFV- MP - 1040
       
      Performance Data :
       
       Rated Performances:-
       
      Discharge
      (lpm)
      Pressure
      (bar)
      Power
      RPM
      kilowatts
      Horsepower
      4000
      10
      125
      168
      3200
      4500
      7
      105
      140
      2850
       
       Rated Performances:-
       
      Discharge
      (lpm)
      Pressure
      (bar)
      Power
      RPM
      kilowatts
      Horsepower
      300
      40
      85
      114
      2950
       
       Suction Inlet:- 140 mm
       Priming Performance Range:- up to 8 meters
       Recommended Priming Speed:- 100 rpm to 2500 rpm
       Thermal Relief Valve Activation:- 55° C to 60°C
       Typical Dimensions:-
       
      Length
      Width
      Height
      750 mm
      790 mm
      700 mm
      29.5 inches
      31.1 inches
      27.5 inches
       
      *The Performance data stated above is observed at test conditions
      (3.0 meters suction lift at NTP conditions).
      *For capacities other than stated above, please contact technical department.
       
  • Download
      Downloads For MFV - MP - 1040
         
       


Majorly we serve our products to customers from Bahrain, Iran, Iraq, Kuwait, Oman, Qatar, Saudi Arabia, UAE, Italy, Spain, Ukraine, Poland, Czech Republic, Belarus, Croatia, Slovakia, Cyprus, Estonia, France, Greece, Serbia, Slovenia, Algeria, Libya, Tunisia, Nigeria, Zambia, South Africa, Indonesia, Philippines, Lebanon and Singapore